The Qwiic and the Dead

Hello everyone! This week we are releasing several exciting products we’ve been working on for a while, starting with the new ZED-F9R GPS-RTK Dead Reckoning Breakout and pHAT boards! These two boards are a great addition to our existing GPS and GNSS product line, so make sure to take a closer look below.

We also have a special edition of the Qwiic Pro Micro we’ve dubbed the “BoogieBoard.” We only have a limited quantity available, and you can even pick it up today for free (see below)! To round out the day we have a new Hardware Starter Kit for the Raspberry Pi 4, a 2.4GHz antenna, and two 50-pin board-to-board double slot connectors.

Summer activities canceled? Welcome to SparkFun Summer Camp! We’ve got your classic camp fun covered online – with an electronics twist. Check out our activity schedule, and let’s have some fun! This is our second week of sales (hello BoogieBoard!), next week will be robotics, and week four is machine learning.

Now onto our new products!

There will be a Reckoning!

SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)

added to your cart!

SparkFun GPS-RTK Dead Reckoning Breakout – ZED-F9R (Qwiic)

In stock GPS-16344

The SparkFun ZED-F9R GPS-RTK Breakout is a high precision, Automotive Dead Reckoning board with equally impressive configurat…

$289.95

SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi

In stock GPS-16475

The SparkFun ZED-F9R GPS-RTK pHAT is a high precision, Automotive Dead Reckoning board with equally impressive configuration …

$249.95
Favorited Favorite 0

The SparkFun ZED-F9R GPS-RTK Breakout and pHAT for Raspberry Pi are high precision GNSS boards with equally impressive configuration options that take advantage of u-blox’s Automotive Dead Reckoning (ADR) technology. The ZED-F9R module provides a highly accurate, continuous position by fusing a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data and GNSS measurements. These boards are 184-Channel GNSS Receivers that receive both L1C/A and L2C bands, and have an horizontal position accuracy of 0.20m with RTK.


SparkFun Qwiic Pro Micro BoogieBoard

In stock DEV-16442

The SparkFun Qwiic Pro Micro adds a reset button, Qwiic connector, USB-C, and castellated pads to the miniaturized Arduino bo…

$19.95
Favorited Favorite 0

The SparkFun BoogieBoard is a limited edition version of the SparkFun Qwiic Pro Micro – USB-C. There are only 275 units available and once they’re gone, they’re gone forever. Luckily for you, you can pick one of these boards up for free – just add the SparkFun BoogieBoard to your cart and use code “BOOGIEBOARD20” when your cart reaches $75 or more (not including this board or shipping/tax/discounts) to get yours! Sorry distributors, this item is not available for resell.


SparkFun Raspberry Pi 4 Hardware Starter Kit – 4GB

In stock KIT-16388

The SparkFun Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Pi 4 in a…

$159.95

The Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instructions for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn’t typically considered a go-to for hardware projects, its I/O pins hold a lot of benefits that you can use for a variety of applications. This kit covers the basics like using LEDs and buttons, while providing a solid set of parts for working with any other hardware I/O and the 40-pin header.


2.4GHz U.FL Antenna - Panel Mount

added to your cart!

2.4GHz U.FL Antenna – Panel Mount

In stock WRL-16823

This 2.4GHz Antenna adds the ability to be directly panel-mounted. It plugs in through a 216mm cable with U.FL connector on …

$11.95

Duck antennas offer great range in a rugged option for wireless technologies. This 2.4 GHz antenna adds the ability to be directly panel-mounted. It plugs in through a 216 mm cable with U.FL connector on the end.


Board to Board Double Slot Female Connector – 50 pin, 0.5mm

In stock PRT-16890

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards.

$1.50

Board to Board Double Slot Male Connector – 50 pin, 0.5mm

In stock PRT-16891

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards.

$1.50

These are the surface mount, 50-pin, 0.5 mm board-to-board double slot female and male connectors found on the Alchitry FPGA boards. These headers allow Alchitry FPGA boards to stack on one another by being soldered to the top side of the board.

Scroll to Top